3G+ Protection Multitask Face Cream

Author Image

By: TOM BRANNA

Editor

3G+ Protection Multitask Face Cream
Ingredients
%

Phase A

  • Eumulgin SG (Sodium stearoyl glutamate)
  • 0.40

0

  • Cutina GMS-V (Glyceryl stearate)
  • 3.00
  • Lanette O (Cetearyl alcohol)
  • 0.70
  • Cetiol CC (Dicaprylyl carbonate)
  • 5.00
  • Cetiol PGL (Hexyldecanol (and) hexyldecyl laurate)
  • 4.00
  • Myritol 331 (Cocogycerides)
  • 2.00
  • Cegesoft VP (Olus oil (and) hydrogenated vegetable oil (and) candellila cera)
  • 2.00
  • Vegetable Oil Jojoba HVJ012 (Fytosan) (Jojoba oil*)
  • 3.00
  • Lipofructyl Argan LS 9779 (Argania spinosa) oil
  • 1.00
  • Proteasyl PW PSE LS 8951 (Pisum sativum extract (and) cyclodextrin)
  • 0.30
  • Purisoft PW PSE LS 9836 (Moringa pterygosperma extract (and) dextrin)
  • 0.10
  • Glycerine
  • 3.00
  • Keltrol CG-T (Kelco) (Xanthan gum)
  • 1.00
  • Geogard 111S (Lonza) (Sodium dehydroacetate)
  • 0.60
  • Hamamelis Floral Water HYD3006 (Fytosan) (Hamamelis virginiana distillate)
  • 7.00
  • Perfume (Thu00e9 Vert Natco 0726226) (Expressions Parfumu00e9es)
  • 0.40

Phase B

  • Deionized water
  • 65.65

Phase C

  • Coviox T90EU (Tocopherol)
  • 0.10

Phase D

  • Citric acid (a.s.10%)
  • 0.75

Procedure

Heat phases A and B at 75°C. When the two phases are homogeneous, add phase B in phase A. Allow the emulsion to cool while stirring. At 60-55°C, homogenize with Ultra Turrax T50 during 1 mn at 4000rpm. At T<40°C, add phase C and cool down to room temperature. Adjust pH at 6.4-6.6 with phase IV.

Properties

Weight accuracy—1%; Final viscosity—34,000 mPa.s (Brk, RVT, RT spindle 5, speed 10); Stability—stable 3 months at 4, -5, 40, 50°C and room temperature.
` *BIO ECOCERT (www.fytosan.com)

More Information

Cognis GmbH, Care Chemicals Division, Monheim, Germany, Website: www.cognis.com